Aluminum Snowmobile Trailers Trailer Wiring Problems?

Trailer wiring problems? - aluminum snowmobile trailers

I have an aluminum trailer 2nd Place with snow. If I my light to my car without lights. But if you have a turn signal work in the trailer. The brake lights also work on the trailer. They simply have no running lights. Ideas?


Thanks

4 comments:

bobweb said...

If the trailer is off work on your truck and your vehicle is a GM truck or other dark glasses, that the yellow light in the turn away, then you may need an adapter module converts the electrical wiring of the trailer truck to the Cabling Standard. http://www.etrailer.com modules sold adapter cable and a cheap LED light trailer tester is connected to the rear wheel of his truck / trailer connection, to see whether it is functioning properly. You can use your model year on the website can be the electrical connection is required to use to find your car.

John D said...

I think it's more of a plug 4 trailer light board, is the first country (the eccentric 4), 2 next (green and yellow), the teeth are flashing. Your car will be transferred to the current iteration 2 shows a turn signal or brake lights. That is) your lights (brown. It is likely that he will be attacked or to receive advice by a bad connection and if I can almost guarantee that a blown fuse. There are separate circuit fuse of the trailer lights.

John D said...

I think it's more of a plug 4 trailer light board, is the first country (the eccentric 4), 2 next (green and yellow), the teeth are flashing. Your car will be transferred to the current iteration 2 shows a turn signal or brake lights. That is) your lights (brown. It is likely that he will be attacked or to receive advice by a bad connection and if I can almost guarantee that a blown fuse. There are separate circuit fuse of the trailer lights.

Sonny said...

the truck can make a backup for the lighting of the trailer tail

Post a Comment